Bandry

Production

How to record guitar at home (electric and acoustic)

By the Bandry Team  ยท  Nov 3, 2026  ยท  7 min read

Your amp sounds huge in the room. You put a mic in front of it, hit record, and play it back: thin, fizzy, and somehow smaller than the phone video your bassist took at rehearsal. Learning how to record guitar is mostly learning why that happens, because the problem is almost never the guitar or the player.

What you hear standing in front of an amp is the speaker, the cabinet, the room and your own body all at once. A mic an inch from the grille hears one small patch of one speaker. Move it a little and the tone changes a lot. Add a home room with flat walls and neighbors, and you start to see why guitar tone that sounds great live falls apart on a recording.

Pick Your Path: Amp, Direct, or Both

There are three common ways to record electric guitar at home.

  • Miked amp. A real amp, a mic in front of the speaker. You get the feel of moving air and a real speaker, but it takes volume, a room that doesn't color the sound too much, and some patience with placement.
  • Direct into an amp sim. The guitar goes into the interface's instrument input and software handles the amp and cab. Quiet, repeatable, and in a small untreated room, a good sim often sounds better than a great amp recorded badly.
  • Both, with a DI. Split the guitar so you record a clean, dry DI track alongside whatever tone you're monitoring. The DI is your safety net: later you can run it through a sim, or send it back out to a real amp with a reamp box.

Whichever you pick, record the DI if you can. One catch: any pedal in front of the DI is printed on it for good, so keep the DI signal as clean as possible and add effects after.

How to Mic a Guitar Amp

A dynamic mic is the classic close-mic choice for guitar cabs. Start with it about an inch from the grille, pointed straight at the speaker, roughly where the dust cap meets the cone. Shine a flashlight through the grille cloth to see where the speaker actually sits.

  • Across the cone. Toward the center sounds brighter and more aggressive. Toward the edge sounds darker and rounder.
  • Distance. Closer adds bass. If it's boomy, back off a little. If it's thin, move in.
  • Angle. Once the position is close, try tilting the mic about 45 degrees to soften harsh highs.

Change one thing at a time. Settle the spot on the cone first, then distance, then angle. Small moves matter, so listen on closed-back headphones in another room or record short tests and compare. If you blend two mics on the same cab, check the phase: flip one mic's polarity and keep whichever setting sounds fuller, the same check our guide to recording drums walks through for kits.

Get the Tone Right Before You Hit Record

Most thin, fizzy guitar recordings come from the amp settings, not the mic. A tone that fills a room on its own usually has too much gain and too much low end for a full mix.

  • Back off the gain. Stacked tracks add up. A rhythm sound with less distortion than you'd use live often sounds heavier on the recording, and the notes stay clear.
  • Fresh strings and a setup. Old strings and bad intonation sound worse on playback than they do in the room. Change strings a day or two before the session so they settle.
  • Set levels with headroom. Play the loudest part of the song while you set the input, and leave room so the peaks never clip.
  • Tune often. Tune before every take, not every song.

How to Record Acoustic Guitar

Acoustic guitar is a different job: no amp, so the mic has to hear the instrument itself, and the room matters more. A condenser mic is the usual pick. Start about 6 to 12 inches away, aimed near the 12th fret where the neck meets the body.

Don't point the mic straight into the sound hole. That's where the boom lives, and it turns into mud in a mix. If the guitar sounds thin, move the mic a little toward the body. If it's boomy, move it toward the neck. Record in the least echoey spot you have: a room with a rug, a couch and a full bookshelf beats a bare kitchen. Our guide to building a home studio covers taming a small room on a budget.

Double Track Rhythm Parts for Width

The trick behind most wide rock and pop guitar sounds is simple: play the rhythm part twice. Record two separate takes of the same part, pan one left and one right, and the small differences in timing and pick attack make the guitars sound big while leaving the middle open for the vocal, bass and kick.

Copying one take and panning the copy does not do the same thing. It just sounds like one guitar in the middle. You need two real performances, played tight to the click. Try a slightly different amp setting, guitar or pickup on the second take for even more width. Leads and melody parts usually stay single and sit closer to the center.

When to Bring in a Pro

Sometimes the part needs a better player, or the mix needs better ears. A session guitarist who tracks remotely can send back finished parts, and a mixing engineer can make doubled guitars, bass and drums sit together. If you go that route, send a clean DI of every guitar alongside your amped tracks so the engineer has options. Our guide to recording vocals at home covers the other half of a home-recorded song.

Using Bandry for this

Need a mic or a small amp for the session? The Market board on Bandry has used gear listings with photos, from dynamic mics to recording amps. Need a player or a mix? Drop a Seeking post on the Bulletin for a Guitarist, a Session musician or a Mixing engineer, and when someone who fits taps ๐Ÿ”—, their contact lands in your Linkups inbox. Start by browsing the music gear marketplace.

Frequently asked questions

Where do you put the mic on a guitar amp?

Start with a dynamic mic about an inch from the grille, pointed at the speaker roughly where the dust cap meets the cone. Pointing at the center of the cone sounds brighter and more aggressive; moving toward the edge sounds darker and rounder. Moving the mic closer adds bass. Change one thing at a time and listen on headphones or in another room before you hit record.

Is it better to record guitar with an amp or direct?

Both work. A miked amp captures the feel of a real amp and speaker in a room, but it needs volume, a decent room and good mic placement. Recording direct into an amp simulator is quieter and far easier at home, and in a small untreated room a good sim often sounds better than a great amp. Many players record a clean DI either way, so they can change the tone later.

What is reamping a guitar?

Reamping means recording a clean, unprocessed DI signal of your guitar, then later sending that recording back out through a real amp and miking it again. A reamp box matches the level and impedance so the amp sees something like a guitar plugged in. It lets you change amps, settings or mic positions after the performance is done, without asking the guitarist to play the part again.

How do you record an acoustic guitar with one mic?

Put a condenser mic about 6 to 12 inches away, aimed near the 12th fret where the neck meets the body. Avoid pointing it straight into the sound hole, which gives a boomy, muddy sound. If it sounds thin, move the mic slightly toward the body; if it sounds boomy, move it toward the neck. Record in the least echoey spot of the room.

Should you double track rhythm guitar?

For many rock, pop and metal songs, yes. Play the same rhythm part twice as two separate takes and pan one left and one right. The small differences between the takes make the guitars sound wide and leave the center open for vocals, bass and drums. Copying one take and panning the copy does not give the same effect, so record it twice.

Ready to try it?

Bandry is live on the App Store. Download it and start posting.

Download

Follow Bandry