Bandry

Production

How to record drums (at home or in a small studio)

By the Bandry Team  ยท  Nov 2, 2026  ยท  7 min read

The guitars sound great, the vocal sits right, and then you solo the drums and they sound like they were recorded through a pillow: a flappy kick, a snare with no crack, cymbals that hiss over everything. Drums are the hardest thing most bands try to track themselves, and learning how to record drums is where a lot of home demos stop sounding like records.

The reason is that a drum kit isn't one instrument. It's a dozen sound sources in one room, played loud, and every mic hears every drum. Add a small room that bounces sound off flat walls, and you're fighting the space as much as the kit. The good news: the setup matters far more than expensive gear. Recording educators who tested the same kit on interfaces with eight, four, two and one inputs found the mic setup made the biggest difference, not the preamps.

Start With a Kit That Sounds Good in the Room

No mic fixes a bad-sounding drum. Fresh heads, a tuned kit and a quiet throne and pedals do more for your recording than any plugin. Our guide to tuning drums covers getting each drum to sound right before a mic goes near it.

Then walk around the room while the drummer plays. If one spot sounds boomy or harsh, move the kit. Rugs under the kit, a couch, blankets or acoustic panels on the nearest walls tame a lot of the boxy sound small rooms are known for.

How Many Mics You Need to Record Drums

  • One or two mics. One mic above and slightly in front of the kit can work for rough demos. Two mics, usually kick plus one overhead, gives you a real low end. The balance has to come from the drummer's playing.
  • Four mics. The common home setup: kick, snare and two overheads. It needs an interface with at least four mic inputs, and it gives you enough control to make the drums sit in a mix.
  • Eight or more. Add toms, hi-hat, a snare bottom mic and room mics. More control, more phase to manage, and more inputs to pay for.

For gear, a dynamic mic like the Shure SM57 on the snare runs around $105 at US retailers, and a dedicated kick mic like the Shure Beta 52A around $219. Overheads are usually a matched pair of condensers.

Mic Placement That Works

A classic place to start is the Glyn Johns method. Put one overhead a few feet above the snare, pointing down. Put the second beside the floor tom, pointed across the kit toward the snare and hi-hat, at about the same distance from the snare as the first. Add a kick mic and a snare mic for punch.

  • Kick. Inside the port or just in front of the resonant head. Closer to the beater gets more attack; further back gets more boom.
  • Snare. A couple of inches above the rim, angled at the center of the head and pointed away from the hi-hat.
  • Overheads. Listen to the whole kit, not just the cymbals. If the cymbals swamp everything, raise or angle them toward the drums.

Set Levels and Check Phase

Have the drummer play the loudest part of the song while you set each input. Leave plenty of headroom: a clipped snare hit can't be fixed later. Then record a test take and listen to it, because headphones in the same room as a loud kit lie.

Then check phase. When two mics hear the same drum at slightly different times, frequencies cancel and the drum thins out. Snare top and bottom mics almost always need one flipped in polarity, usually the bottom. For every other close mic, solo it with the overheads, flip its polarity, and keep whichever setting sounds fuller.

Get a Great Take, Not Just a Good Sound

A perfect mic setup can't save a nervous or uncomfortable drummer. The performance is still the biggest part of how the drums sound on the record, so set the session up for it.

  • A headphone mix they like. Give the drummer the click, a scratch guitar or keys part, and a guide vocal, loud enough to play to without cranking it. Closed-back headphones keep the click out of the overheads.
  • Rehearse to the click first. If the band never plays to a click, a session is the wrong place to start. Run the songs to it in rehearsal for a week or two.
  • Several full takes. Record three or four complete passes of each song before reaching for edits. Full takes keep the feel, and you can comp the best sections later.
  • Breaks and fresh ears. Drumming is physical. Take breaks between songs, and listen back on speakers, not the same headphones, before calling a take done.

When to Book a Studio Instead

Many bands track guitars, bass and vocals at home and book a studio just for drums. A good live room, a full mic locker and an engineer who has recorded hundreds of kits can save days of fighting a small bedroom. If that's the plan, our guide to booking a recording studio covers what to ask and how to prepare so the session goes fast.

Using Bandry for this

If you need a drummer for the session or a room to track in, Bandry has both sides. Drop a Seeking post on the Bulletin for a Drummer or a Studio, and when someone who fits taps ๐Ÿ”—, their contact lands in your Linkups inbox. The Resources tab also runs a live Apple Maps search for studios near you. Start with recording studios near you.

Frequently asked questions

How many mics do you need to record drums?

You can get a usable drum sound with one or two mics, but four is the common starting point: one on the kick, one on the snare and two overheads. That needs an audio interface with at least four mic inputs. More mics on toms and hi-hat give more control in the mix, but they also add more phase to manage and more inputs to buy.

What is the Glyn Johns drum mic method?

It is a classic technique built around two kit mics. One goes a few feet above the snare, pointed down. The second sits beside the floor tom, about the same distance from the snare, pointed across the kit toward the snare and hi-hat. Kick and snare close mics are usually added for punch. It captures a natural, balanced kit with very few mics.

Can you record drums with a 2 input interface?

Yes. A common two-mic setup is one mic on the kick and one overhead or kit mic above and slightly in front of the drummer. You get less control over each drum in the mix, so the balance has to come from the drummer and the room. Tests by recording educators have found mic setup matters more than the interface, so start with what you have.

What are the best mics for recording drums?

Many engineers use a dynamic mic like the Shure SM57 on the snare, a dedicated kick mic like the Shure Beta 52A or AKG D112 on the kick, and a matched pair of condenser mics as overheads. At US retailers an SM57 is around $105 and a Beta 52A around $219. Drum mic packs bundle several of these together.

Why do my recorded drums sound thin?

Often it is phase. When two mics pick up the same drum at slightly different times, some frequencies cancel and the drum loses body. Snare top and bottom mics almost always need one flipped in polarity. Check each mic against the overheads by ear and keep the setting that sounds fuller. A badly tuned kit or a small, boxy room can also make drums sound thin.

Ready to try it?

Bandry is live on the App Store. Download it and start posting.

Download

Follow Bandry